Suppose we want to insert a Magelis terminal to a Slave PLC which is connected to a network Unitel-way. To the Slave PLC have given an address AD0, which is defined in the network. To be able to connect the Magelis at the Slave PLC, do the following: Select the Menu Configuration -> Equipment Symbols ... and get the following picture (Fig. 1),
A simple network Unitel-way without PCMCIA card is not feasible to achieve the connection because the number of Slave PLCs is limited. The addition of two or more terminals Magelis consists networks using Unitel-way card PCMCIA RS485 (TSXSCP114) adjustable to 32 Stations (Magelis - PLC)
In addition the cable XBTZ968 which is used for the connection between Magelis and Slave PLC must be modified or added by a serial cable specially constructed taking in mind the Slave PLC address (it is recommended to constructed a serial cable to added to the existing XBTZ968)
For further information how to achieve the connection please contact
Select Modify and displays the next image (Fig. 2) which will change the existing usual (0,254,0,254,0) which referred to the master PLC, and give one another Symbol name of your choice.
In addition the cable XBTZ968 which is used for the connection between Magelis and Slave PLC must be modified or added by a serial cable specially constructed taking in mind the Slave PLC address (it is recommended to constructed a serial cable to added to the existing XBTZ968)
For further information how to achieve the connection please contact