This application simulate the daylight and night circle for artificial lighting
(fluroscents lamps) in a dark fishtank. The purpose is to control the intensity
of 2 fluroscent lamps during the day. So in a specific hour of the day the
lamps turn on slowly with a ramp-up during daybreak , then stay on
with full power for some time, then start to turn off slowly with a ramp down
during dusk period and finally stayed off in night period.
We use an analog voltage output (0 - 10V) to control a fluroscent lamp rheostat.
The ramp up period (04:00 till 08:00)
The steady state ON period (08:00 till 16)
The ramp down period (16:00 till 20:00
The night Off period (20:00 till 04:00)
The above periods is fixed and cannot be changed. If other periods need we could change these fixed periods. The program could be expand using a XBT to change the periods, but this is left upon user request
The configuration used is
Twido Software V3.5
We could use any Twido PLC with an analog card. In the application
TWDLMDA20DTK : CPU
TWDAMO1HT : Analog card 12 bits resolution
TWDXCPRTC Real Time Clock
In the application we use a 12 bits analog card
Steps/min=4095/4*60 = 17,0625steps/min
Voltage/min = 17,0625*10V/4095 = 0.0416667 Volts/min
Use of the application is for dark fishtank (vivarium) not open one. Maybe the user could use the program in various other applications
You could request for the program
(fluroscents lamps) in a dark fishtank. The purpose is to control the intensity
of 2 fluroscent lamps during the day. So in a specific hour of the day the
lamps turn on slowly with a ramp-up during daybreak , then stay on
with full power for some time, then start to turn off slowly with a ramp down
during dusk period and finally stayed off in night period.
We use an analog voltage output (0 - 10V) to control a fluroscent lamp rheostat.
The ramp up period (04:00 till 08:00)
The steady state ON period (08:00 till 16)
The ramp down period (16:00 till 20:00
The night Off period (20:00 till 04:00)
The above periods is fixed and cannot be changed. If other periods need we could change these fixed periods. The program could be expand using a XBT to change the periods, but this is left upon user request
The configuration used is
Twido Software V3.5
We could use any Twido PLC with an analog card. In the application
TWDLMDA20DTK : CPU
TWDAMO1HT : Analog card 12 bits resolution
TWDXCPRTC Real Time Clock
In the application we use a 12 bits analog card
Steps/min=4095/4*60 = 17,0625steps/min
Voltage/min = 17,0625*10V/4095 = 0.0416667 Volts/min
Use of the application is for dark fishtank (vivarium) not open one. Maybe the user could use the program in various other applications
You could request for the program